| Brochure | Website |
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
PREMAX AUP
PRODUCT ADVANTAGES
- HOT-TEMP WASH with increased temperature of 63°C increase the capacity up to 75 racks/h
- Optimized fresh water consumptiom of 2,3 l/cycle
- Insulated hood reduces noise and heat loss up to 50%
- Deep clean wash program STARCH REMOVAL removes the starch from the crockery
- Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
- Wash Program POWER-PLUS: selectable higher pressure program to wash heavily soiled wash items
- Fine Filter System GENIUS-X²: advanced filter system with prewash function, reduces detergent consumption by up to 30 %.
- Ready to install: incl. fill and drain hoses, power cord, non-return valve
- Completely equipped with rinse pressure pump, drain pump and chemical dispense
- Electronic Control SMARTRONIC: with color-coded status indication
- Hood Design EASY-LIFT: 50 % less effort is needed to open the hood – a real benefi t for the operator
- Hood Concept E-STORE with fully enclosed 4-sided hoo keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
- Rinse Pump ACCURINSE: guarantees a constant 2.3l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
- Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
- Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
- Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger Saves up to 6,5 kW
TECHNICAL DATA
| Flexible drain hose 2000 mm |
20mm inner / 25mm outer diam. |
| Fresh water connection: pressure hose 1500 mm flow pressure necessary water flow |
R 3/4" inside 0,5 - 10 bar max 60°C 5 l/min |
| Power cord | 2500 mm |
| Hoses for detergent and rinse agent | 2000 mm each |
| Cycle times 1) | 47 sec. 70 sec. 150 sec. endless |
| Water consumption |
2,3 l / rack |
| Tank capacity | 40 l |
| Tank heating | 2,5 kW |
| Power supply |
400 / 50 / 3 / N |
| Booster loading | 12,3 (6,15) kW |
| Total loading | 17,1 kW / 3 x 35 A (10,9 kW / 3 x 25 A) |
| Pump capacity |
2 x 1,1 kW |
| Loading height | 440 mm |
| Noise level |
70 dB (A) 68 db (A) insul. |
| Weight net |
appr. 135 kg |
1) To reach set rinse temperatures even with cold water connection,
the actual cycle-times extend accordingly.
the actual cycle-times extend accordingly.
Â
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de