HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de

PROFI AMX

PROFI AMX Hood-type dishwasher

PRODUCT ADVANTAGES

  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Fine Filter System GENIUS-X2: advanced filter system with prewash function reduces detergent consumption by up to 30%
  • Electronic Control SMARTRONIC: with color-coded status indication
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Insulated hood reduces noise and heat loss by up to 50%
  • Rinse Pump ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6.5 kW

TECHNICAL DATA

Flexible drain hose 2,000 mm   20mm inner / 25mm outer diam.
 Fresh water connection:
pressure hose 2,000 mm
flow pressure


necessary waterflow
 
R 3/4" inside
0.5 - 10 bar max 60°C
softener models:
0.8 - 10 bar
5 l/min
 Power cord  2,500 mm
 Hoses for detergent
and rinse agent
 2,000 mm each
 Cycle times 1)  60 sec.
90 sec.
120 sec.
 
 Water consumption  2.5 l / rack
 Tank capacity  21 l
 Tank heating  2.5 kW interlocked
 Power supply  400 / 50 / 3 / N
 Booster loading  6.15 kW
 Total loading  7 kW / 3 x 16 A
 
 Pump capacity
 
0.7 kW / 350 l/min
Loading height 440 mm
Noise level
 
67 dB(A)
65 dB(A) insul.
 
 Weight net  approx. 105 kg
 
1) To reach set rinse temperatures even with cold water connection,
the actual cycle-times extend accordingly.

BROCHURE

For further brochures or other languages please contact your dealer or contact us.

ACCESSORIES

Description 

Back panel
(if unit is not installed against wall, all units have closing frame to wall at rear)

Corner splash panel
for open gap to the wall in case of corner installation



 
Username
Password
Genial Einfach Genial1

HOBART worldwide

HOBART worldwide

Distributor map

Find your distributor:
 
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de