Find your distributor:
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
PROFI UXT
PRODUCT ADVANTAGES
- Wash Program POWER-PLUS: selectable higher pressure program to wash heavily soiled wash items
- Strainer control PROOF: prevents operation without tank strainer
- Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
- Loading height L: above-average loading height of 865 mm
- Machine height 2-in-1: machine height can be reduced by up to 200 mm with the door open - for use in spaces with low ceilings
- The optional waste water heat recovery system transfers heat from hot waste water to the fresh water supply, reducing boiler power consumption and saving up to 8.6 kW/h.
- The optional exhaust heat recovery including an integrated door system VAPOSTOP uses steam to heat fresh feed water and reduces the amount of power needed to reach the final rinse temperature by up to 3.5 kW/h
- Single button operation SMARTRONIC: color coded status indication and remaining time indicator
- Refill signal for machines with external chemical container
- Hygiene Program ACTIVE and hygiene tab INTENSIVE: remove calcium carbonate and other deposits from tank wall
- The optional door system VAPOSTOP: prevents vapour to escape from machine when door is opened
- Fine filter system GENIUS-X²: advanced filter system with prewash function reduces detergent consumption
- Rinse pump ACCURINSE: constant rinse, independent of on-site pressure differences; saves up to 30% water, energy and chemicals
- Double wall housing and external manifold for easier cleaning and lower noise level
- Usable inside dimensions w x d x h: 1,258 x 773 x 860 mm (with rack 825 mm)
- Ready to install, incl. fill and drain hoses, electrical cable, back-flow preventer
- Completely equipped with rinse pressure pump, drain pump and dispenser for rinse aid
TECHNICAL DATA
| flexible drain hose 2,000 mm | 24 mm inner / 28 mm outer diam. |
| fresh water connection: pressure hose 1,500 mm flow pressure |
R 3/4" inside 0.5 - 10 bar max 60°C softener models: 0.8 - 10 bar |
| power cord | 1,800 mm |
| 2 chemical suction hoses | 2,500 mm each |
| cycle times | 120 sec. 240 sec. 360 sec. endless |
| water consumption | 7.5/9/9 l / rack |
| tank capacity | 130 l |
| tank heating | 6 kW |
| voltage | 400 / 50 / 3 / N |
| booster loading | 15 (9) kW |
| total loading | 21.2 (15.7) kW 3 x 50 (35) A |
| pump capacity |
2 x 2.7 kW 2 x 1,300 l / min. |
| noise level | 67 dB (A) |
| weight net | ~300 kg |
ACCESSORIES
| Description |
|
Integral drain heat recovery |
|
Integral exhaust heat recovery and |
|
Insert for 8 sheets 568 x 625 mm, |
| Separate tank fill |
| Thermolabel |
HOBART worldwide
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de