Contact us
HOBART GmbH
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Roadmap
Sales Contact
Sales Department
+49 781 600-2820
+49 781 600-2819
Spare Parts Department
+49 781 600-2692
+49 781 600-2699
Contact
Product comparison
Compare products now


Comparison list
HOBART
Premax Line
Profi Line
Ecomax By Hobart

UXTH - Parts cleaning

The UXTH series is the optimal cleaning system to clean components in small quantities. The chamber cleaning system permits oils, greases, chips and emulsions to be cleaned off components.

  • Ergonomic handling with supply and unloading tables next to the system
  • Fully insulated machine
  • Refill signal for detergent and rinse aid
  • Nominal capacity up to 30 cycles/h
  • Heating optionally with electricity, hot water or gas
  • Completely equipped with: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating
  • Exhaust energy storage: the fully enclosed 4-sided hood keeps steam and energy inside the system: energy saving up to 5 kW; less humidity in the room and better hygienic conditions
  • ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
  • VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display
  • POWER wash: high-pressure washing to wash heavily soiled wash items
  • Easy machine start: the machine starts automatically when the hood is closed
  • LOOP system: waste-water-free operation of the cleaning system due to an external tank with oil separator
  • Made in Germany

Technical data

Loading height 620 mm, extendible to 880 mm
Rack size 1,240 x 700 mm
Wash and rinse temperature 60 - 85 °C
Cycle times** ≥ 2 min
Wash ware Pressed, drawn and punched parts, aluminium die casting parts, machined parts
Contamination Various oils, emulsions, chips, dust
Outside dimensions (W x D x H) (with closed hood) 1447 x 902 x 1732 mm

*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly. For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a water softener of the product line HYDROLINE PROTECT.

  • LOOP system with oil separator and micro filtration
    Waste-water-free operation of the cleaning system due to an external tank with oil separator and extension of the bath service life with filtration and water treatment.
  • Osmosis system
    Minerals and salts are removed from the water to provide stainless cleaning results.
  • Water treatment
    The treatment of the cleaning medium leads to maximizing the bath life and thus to reducing your operating costs. The type of treatment is adapted individually to the requirements on site.
  • Bottom tray according to WHG
    The bottom tray is used to collect the cleaning medium in the event of a leak in the wash tank. It is offered as an option. The bottom trays satisf the requirements of the German Water Resources Law (WHG).
top