Contact us
HOBART GmbH
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Roadmap
Sales Contact
Sales Department
+49 781 600-2820
+49 781 600-2819
Spare Parts Department
+49 781 600-2692
+49 781 600-2699
Contact
Product comparison
Compare products now


Comparison list
HOBART
Premax Line
Profi Line
Ecomax By Hobart

UXT-TKR - Animal cage cleaning

  • Fully insulated machine
  • Refill signal for detergent and rinse aid
  • Nominal capacity up to 30 cycles/h
  • Heating optionally with electricity, hot water or gas
  • USB-interface for comfortable download of operational data
  • Blocked filter sensor
  • Special hygiene programme to remove dirt deposits and limescale deposits
  • Completely equipped with: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
  • ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
  • VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display
  • POWER wash: high-pressure washing to wash heavily soiled wash items
  • Made in Germany
  • Ergonomic handling with supply and unloading tables next to the system
  • Optional drain water and exhaust heat recovery systems additionally reduce the operating costs
  • Intelligent energy management - the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
  • Water bottle filling system for optimum filling of the bottles immediately after cleaning
  • Manual, semi-automatic or automatic uncapping unit can be installed before the cleaning system

Technical data

Loading height 650 mm, extendible to 860 mm
Rack size 1,240 x 700 mm
Wash and rinse temperature 60 - 85 °C
Cycle times** Depending on specification
Throughput Depending on specification
Wash ware Cages, cage lid, water bottles, aquaria, wire grids
Contamination Bedding, excretions, salvia, proteins, algae and bio films
Outside dimensions (W x D x H) (with closed door) 1375 x 945 x 1984 mm

*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly. For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a water softener of the product line HYDROLINE PROTECT.

  • Osmosis system
    Minerals and salts are removed from the water to provide stainless cleaning results.
  • Uncapping unit
    To uncap the water bottles, a manual, semi-automatic or automatic uncapping unit can be installed before the cleaning system.
  • Water bottle filling device
    The swivelling filling rake permits 18 or 36 water bottles to be filled simultaneously after cleaning. When it is not used, it can be turned towards the splash protection wall to save space.
  • Drain heat recovery
    The drain heat recovery system permits the energy, that is stored in the form of heat in the waste water, to be fed back into the cleaning system. It is thus not lost.
  • Exhaust heat recovery
    The fresh water is heated with the energy from the waste steam, thus reducing the energy required for reaching the rinse temperature by up to 7.8 kWh.
top