Contact us
HOBART GmbH
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Roadmap
Contact
Product comparison
Compare products now

Comparison list
HOBART
Premax Line
Profi Line

PREMAX AUP

  • PERMANENT-CLEAN automatic soil removal: innovative filter system eliminates manual pre-cleaning. Soil is immediately removed into an external strainer, which saves operating costs and protects the machine.
  • VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display .
  • SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result.
  • Eco programme: switchable steam rinse cycle reduces fresh-water consumption to 1.4 l/cycle. Saving of up to 44 % water and chemicals.
  • VAPO-ACTIVE steam washing: significantly less manual pre-cleaning and second runs by intensive wash cycles with steam.
  • POWER-PLUS wash programme: selectable high-pressure programme to wash heavily soiled wash items.
  • Exhaust energy storage: the fully enclosed 4-sided hood keeps steam and energy inside the system: energy saving up to 3 kW, less humidity in the kitchen area and better hygienic conditions.
  • CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools.
  • ROTOR-X wash system: separate rotating upper & lower 4-spoke wash arms deliver dynamic wash power.
  • VAPOSTOP (optional): prevents vapour escapingfrom the machine when the hood is opened
  • Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced.
  • Interlocked strainer: prevents operation without tank strainer.
  • EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning.
  • Hood-type dishwasher with switchable high pressure wash for straight through or corner operation
  • Nominal capacity up to 70 racks/h or 1,260 plates/h or 2,520 glasses/h
  • 8 automatic cycles: short, standard, intensive, eco, cutlery, starch-removal, permanent, hygiene
  • Multi-Setting: booster capacity may be reduced from 12.4 kW to 6.2 kW if connected with hot water
  • Heat and noise insulated hood
  • Strainer soil sensor 
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • USB-interface for comfortable download of operational data
  • Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
  • Tank, frame, wash / rinse arms and panels are stainless steel 1,4301
  • 2 plate racks P-18-12
  • 1 universal flat rack B-00-07
  • 1 plastic cutlery rack CB8

Variants

Order number Description
AUP-10A

Basic model

AUPS-10A

with integrated water softener

Technical data

Cycle times* 52 / 70 / 170 / 180 sec.and special cycles
Water consumption 1.4 l/rack
Tank capacity 40 l
Tank heating 2.5 kW
Power supply 400 / 50 / 3N
Booster loading - Standard 12.4 kW
Booster loading - Alternative 6.2 kW
Total loading - Standard 17.5 | 3 x 35 A
Total loading - Alternative 11.3 | 3 x 25 A
Wash pump 2 x 1.1 kW
Rack size 500 x 500 mm
Loading height 440 mm
Noise level 67 dB (A)
Weight (gross / net) 145 / 125 kg

*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 1°dH, if higher we recommend using an integrated water softener or a HOBART HYDROLINE water treatment system.

Accessories

Order number Description
SEF-14/030

VAPOSTOP for AUP(S)-10A
prevents vapour escaping from the machine when the hood is opened

SEF-14/056

Automatic hoodlift for AUP(S)-10A
closes the hood by pressing the start button and opens automatically at the end of the cycle
(loading height: 440 mm, back panel is included)

SEF-14/102

Drain heat recovery
for all AUP(L) without integral softener

SEF-14/021

Drain heat recovery
for all AUP(L)S with integral softener

SEF-15/054

Back panel
(if unit is not installed against wall. All units have closing frame to wall at rear)

ML71726

Corner splash panel
for open distance to the wall in case of corner installation

SEF-14/065

Thermolabel
temperature setting

US-Equipment

 

Please visit our HOBART US website for further equipment

 

Read more

Cookie information

To display the contents of our website as its best, we use cookies. More information about cookies and the option to disagree to the use of cookies can be found in our Privacy policy.

top