with integrated water softener
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly. For corner operation we recommend to make the right side of the machine accessible for service. For machine protection the water hardness should not exceed 1°dH, if higher we recommend using an integrated water softener or a HOBART HYDROLINE water treatment system.
VAPOSTOP for AUPL(S)-10A prevents vapour escaping from the machine when the hood is opened
Automatic hoodlift for AUPL(S)-10A closes the hood by pressing the start button and opens automatically at the end of the cycle (back panel is included)
Drain heat recovery for all AUP(L) without integral softener
Drain heat recovery for all AUP(L)S with integral softener
Back panel necessary if unit is not installed against the wall
Corner splash panel for open distance to the wall in case of corner installation
Corner splash panel for open distance to the wall, in case, that a front table with splash panel is mounted in the middle.
Tray rack 600 x 500 mm, for 10 GN-trays or 12 trays up to 470 mm length, height 11 cm
Plate rack 600 x 500 mm, for 24 plates up to 240 mm Ø or 22 large plates (285 mm Ø), height 11 cm
Universal flat rack 600 x 500 mm, with wide mesh bottom (for example for cutlery baskets for cutlery in upright position), height 11 cm
Thermolabel temperature setting
Please visit our HOBART US website for further equipment