Contact us
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Product comparison
Compare products now

Comparison list
Premax Line
Profi Line
Ecomax By Hobart


  • XL wash chamber: the large hood and chamber provide best wash results, e.g. for
    - up to 24 plates/rack
    - up to 8 sheets 600 x 400 mm
    - up to 8 trays 660 x 500 mm
    - up to 2 1/1 GN-boxes
  • VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display.
  • SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing neededin each rinse cycle to the minimum in order to guarantee a fully hygienic wash result.
  • Exhaust energy storage: the fully enclosed 4-sided hood keeps steam and energy inside the system: energy saving up to 3 kW, less humidity in the kitchen area and better hygienic conditions.
  • CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools.
  • GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35 %.
  • ROTOR-X wash system: separate rotating upper & lower 4-spoke wash arms deliver dynamic wash power.
  • VAPOSTOP (optional): prevents vapour escapingfrom the machine when the hood is opened.
  • Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced.
  • Interlocked strainer: prevents operation without tank strainer.
  • EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning.
  • Hood-type dishwasher for straight through or corner operation
  • Nominal capacity up to 70 racks/h or 1,680 plates/h (with optional P-XL rack) or 2,520 glasses/h, 560 sheets/h, 140 1/1 GN-boxes/h, 70 EN-boxes/h
  • Large chamber with 660 x 500 mm usable space
  • Extra large loading height of 540 mm
  • 6 automatic cycles: short, standard, intensive, starch-removal, permanent, hygiene
  • Multi-Setting: booster capacity may be reduced from 12.4 kW to 6.2 kW if connected with hot water
  • Heat and noise insulated hood
  • Strainer soil sensor
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • USB-interface for comfortable download of operational data
  • Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
  • Tank, frame, wash / rinse arms and panels are stainless steel 1,4301
  • 1 plate rack P-18-12
  • 1 tray rack T-06-09
  • 1 cutlery rack C-01-07


Order number Description

Basic model


with integrated water softener

Technical data

Cycle times* 52 / 75 / 180 sec. and special cycles
Water consumption 2 l/rack
Tank capacity 40 l
Tank heating 2.5 kW
Power supply 400 / 50 / 3N
Booster loading - Standard 12.4 kW
Booster loading - Alternative 6.2 kW
Total loading - Standard 16.3 | 3 x 32 A
Total loading - Alternative 10.1 | 3 x 25 A
Wash pump 1.1 kW
Rack size 500 x 500 | 600 x 500 mm
Loading height 540 mm
Noise level 67 dB (A)
Weight (gross / net) 155 / 135 kg

*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water softener or a HOBART HYDROLINE water treatment system.


Order number Description

prevents vapour escaping from the machine when the hood is opened


prevents vapour escaping from the machine when the hood is opened


Automatic hoodlift for AMXXL-10A
closes the hood by pressing the start button and opens automatically at the end of the cycle (back panel is included)


Automatic hoodlift for AMXXLS-10A
closes the hood by pressing the start button and opens automatically at the end of the cycle (back panel is included)


Drain heat recovery
for AMXXL-10A


Drain heat recovery
for AMXXLS-10A


Back panel
necessary if unit is not installed against the wall


Corner splash panel
for open distance to the wall in case of corner installation


Corner splash panel
for open distance to the wall, in case, that a front table with splash panel is mounted in the middle.


Tray rack
600 x 500 mm, for 10 GN-trays or 12 trays up to 470 mm length, height 11 cm


Plate rack
600 x 500 mm, for 24 plates up to 240 mm Ø or 22 large plates
(285 mm Ø), height 11 cm


Universal flat rack
600 x 500 mm, with wide mesh bottom (for example for cutlery baskets for cutlery in upright position), height 11 cm


temperature setting



Please visit our HOBART US website for further equipment


Read more

Cookie information

To display the contents of our website as its best, we use cookies. More information about cookies and the option to disagree to the use of cookies can be found in our Privacy policy.