Contact us
HOBART GmbH
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Roadmap
Contact
Product comparison
Compare products now

Comparison list
HOBART
Premax Line
Profi Line

PREMAX UPT

  • Extra capacity by side washsystem: capacity up to 8 GN-trays 1/1 or 5 EN2 container
  • Detergent direct spraying system: system soaks the wash ware following the detergent pre-washing cycle and softens even the most severely encrusted food residues
  • VISIOTRONIC control: single-button control with remaining time indicator together with text and graphic display
  • SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result
  • POWER wash: high-pressure washing to wash heavily soiled wash items
  • CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools
  • USB-interface: comfortable download of operational data in form of a protocol via USB
  • GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35 %
  • ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
  • VAPOSTOP (optional): prevents vapour to escape from machine when door is opened
  • The optional drain heat recovery transfers heat from hot drain water to the fresh-water supply, saving up to 12.9 kW
  • The optional exhaust heat recovery uses steam to heat fresh feed water and reduces the amount of power needed, saving up to 7.8 kW
  • Loading height: above-average loading height of 860 mm
  • Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
  • VAPO-ACTIVE steam washing: significantly less manual pre-cleaning and second runs by intensive wash cycles with steam injection
  • Interlocked strainer: prevents operation without tank strainer
  • EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning
  • Hygiene programme: for removal of calcium carbonate and other deposits from wash chamber
  • Front door utensil washer
  • Useable inside dimensions w x d x h: 1110 x 773 x 825mm
  • Nominal capacity up to 30 cycles/h
  • 6 automatic programmes: short, standard, steam washing, detergent direct spraying, continuous, hygiene
  • Double walled housing
  • Strainer soil sensor
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • Separate tank fill (can be deactivated)
  • Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating, separate tank fill (can be deactivated), back panel
  • Tank, frame, wash / rinse arms and panels are stainless steel 1.4301

Variants

Order number Description
UPT-10A

Basic model
Please note: Racks need to be ordered separately

Technical data

Cycle times* 120 / 240 / 280 sec. and special cycles
Water consumption 14 l/rack
Tank capacity 130 l
Tank heating 6.1 kW
Power supply 400 / 50 / 3N
Booster loading - Standard 18.1 kW
Booster loading - Alternative 9.1 kW
Total loading - Standard 24.5 kW / 3 x 50 A
Total loading - Alternative 18.5 kW / 3 x 32 A
Wash pump 2 x 2.9 kW | 2 x 1,150 l/min
Rack size 1,240 x 700 mm
Loading height 860 mm
Noise level 70 dB (A)
Weight (gross / net) 325 / 305 kg

*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly.

Accessories

Order number Description
SEF-15/075

Integrated drain heat recovery
alternatively with reduced kW booster heater
(specify full kW for high capacity throughput – reduced kW may allow reduced total loading)

SEF-15/074

Integrated exhaust heat recovery, condensation and VAPOSTOP system

ML71620

Rack assortment UXT/UPT:
base rack 323741, universal insert 323753, cutlery rack C-01-07

ML71655

Rack assortment UXT/UPT:
base rack 323741, insert 323637 for 8 large sheets, cutlery rack C-01-07

323741

Basic rack
1,240 x 700 mm, for UXT/UPT Models

323637

Insert
568 x 625 mm, for 8 large sheets, distance between rows: 5.9 cm

323753

Insert
568 x 665 mm
suitable for plates, bowls, sheets, etc.

HLSU-1

Only available in Germany

US-Equipment

Please visit our HOBART US website for further equipment

Read more

Cookie information

To display the contents of our website as its best, we use cookies. More information about cookies and the option to disagree to the use of cookies can be found in our Privacy policy.

top