Contact us
HOBART GmbH
Robert-Bosch-Straße 17
77656 Offenburg
+49 781 600-0
+49 781 600-2319

Roadmap
Sales Contact
Sales Department
+49 781 600-2820
+49 781 600-2819
Spare Parts Department
+49 781 600-2692
+49 781 600-2699
Contact
Product comparison
Compare products now


Comparison list
HOBART
Premax Line
Profi Line
Ecomax By Hobart

HYDROLINE PURE RO-L

  • For automatic rack-type and flight-type machines only
  • The raw mains water enters enclosed system and is forced at high pressure through a special extremely fine membrane
  • Salts and minerals are thereby completely removed from the water. The downstream dishwasher is thus supplied by perfectly clean water
  • Supply of demineralized water to the standard break tank for final rinse. Not usable with separate DEMI rinse sections
  • If the total hardness of the mains water exceeds 10°dH, we recommend installing an upstream HYDROLINE PROTECT SD-H unit
  • Back-flow prevention not included
  • At a chlorine concentration above 0.05 mg/l acarbon filter on-site is required
  • Inclusive housing

Variants

Order number Description
RO-L28 + SEF13/111

Reverse osmosis for flight-type machines
(machine components are prepared for installation,
but installation of RO-L must be done by local service)

RO-L28 + SEF14/007 + 01- 534987-001

Reverse osmosis for rack-type machines with INFOTRONIC
(machine components are prepared for installation,
but installation of RO-L must be done by local service)

 

RO-L28 + SEF14/006 + 01- 534987-001

Reverse osmosis for rack-type machines with PROTRONIC XL
(machine components are prepared for installation,
but installation of RO-L must be done by local service)

 

RO-L28 + SEF19/065 + 01- 534987-001

Reverse osmosis for rack-type machines CS
(machine components are prepared for installation,
but installation of RO-L must be done by local service)

 

  • High capacity / efficiency system
  • Continuous treatment system providing demineralised water for top-quality wash results
  • Prevents salt and limescale stains on dishes, glassware and cutlery in areas where carbon hardness is high
  • No need for manual polishing of glasses and cutlery
  • Protects machine against limescale deposits
  • Optimises the effectiveness of detergents - the dosing rate can be reduced
  • Unrivalled capacity at very low operating costs
  • Compact dimensions
  • Mixing valve included

Technical data

Power supply 230 / 50 / 1
Total loading - Standard 0.6
Weight (gross / net) -/42 Kg
Maximum hardness 25 °dH
Max. conductivity supply water 2,000 µS/cm
Mineral retention rate 98 %
Supply capacity maximum 3,500 l / day | 280 l / h 4.6 l/min
top